Automotive Interior Coating & Surface Solution Specialist，Contact Us For The Latest Products
-
HomeNeed Custom Solutions for Your Industry?Get Instant QuotesNeed Custom Solutions for Your Industry?Get Instant QuotesNeed Custom Solutions for Your Industry?Get Instant QuotesNeed Custom Solutions for Your Industry?Get Instant QuotesNeed Custom Solutions for Your Industry?Get Instant QuotesNeed Custom Solutions for Your Industry?Get Instant Quotes
2025-05-28
The construction skills of self-painting plastic toys and the treatment methods of common problems improve the aesthetics of the repair effect
The construction skills and common problem treatment methods of self-painting plastic toys directly affect the aesthetics of the final repair effect. Mastering these skills can make DIY repair more convenient.The preparation work before construction is the basis for obtaining good repair results.The surface of the toy should be thoroughly cleaned to remove oil, dust and fingerprints, and can be wiped with a neutral detergent or alcohol.For toys with smooth surfaces, fine sandpaper can be gently polished to increase the adhesion of the paint.Parts that need to be protected, such as transparent windows, logos, etc., can be carefully covered with masking paper.The construction environment should be well ventilated, the temperature is appropriate, and spraying under humid or low temperature conditions should be avoided. These factors will affect the leveling and drying of the coating.
Spraying techniques directly affect the appearance quality of the coating.Shake well before using self-painting to mix the paint evenly.When spraying, keep the tank body at a distance of about 20 to 30 centimeters from the surface of the toy, and move at a uniform speed to avoid staying at one point for too long and causing it to flow.Usually multiple thin sprays are used, and after each layer is sprayed, wait a few minutes before spraying the next layer, which can make the coating uniform and delicate, and avoid sagging and orange peel.For light-colored sprays that need to cover dark colors, it may be necessary to increase the number of sprays appropriately, but the principle of multiple thin sprays should also be followed.After the spraying is complete, it is necessary to keep enough time for the coating to fully cure, and avoid touch and friction during this period.
Common problems and treatment methods that may be encountered during the construction process also need to be mastered.If there is flow, it is usually because the spraying distance is too close or the one-time spraying is too thick. After the coating is dried, the flow marks can be gently polished with fine sandpaper, and then re-sprayed.The orange peel phenomenon may be due to the partial drying of the paint mist caused by the spraying distance is too far, or the ambient temperature is too high. The spraying distance and environmental conditions can be adjusted appropriately.The particles on the surface of the coating may be caused by environmental dust. It can be gently polished with very fine sandpaper after drying, and then polished.If poor adhesion causes peeling, it may be due to improper surface treatment or inappropriate coating selection. It is necessary to completely remove the old coating and reprocess the surface before spraying.By mastering these skills and problem handling methods, the repair effect of self-painting plastic toys can be made more beautiful and lasting.
Subscribe
Get in touch with our sales team to discuss the best options for your business.
Sales Enquiries
Contact Us
Need support? Get in touch with our experts for product-specific support and technical assistance.
haoerwei888@gmail.com
WhatsApp: +86 18064699359
No. 12, A2 Road, Huacai Chemical Coatings City, Wengcheng Town, Wengyuan County, Shaoguan City, Guangdong Province
Follow Us
Copyright © 2026 Wengyuan County Haoerwei Chemical Co., Ltd.
SAF Coolest v1.3.1.2 设置面板 GAGSF-ZGYF-JASFE-ZZQ
无数据提示
Sorry, the current section is being updated, so stay tuned!
You can view other sections or return to Home Page